Styrene Plastic

This is the out of production and very hard to find Concept Moon Ship 1:96 Scale Plastic Model Kit by Atlantis. Designed back in 1959 as a laboratory and living quarters for a its three man crew, the Moon Ship was the type of vehicle they imagined would be used on the first lunar exploration expidition. The completed model is 6.25-incjes (17cm) and includes water-slide decals and a display stand. Comes new in a manufacturer shrink-wrapped box.

This is the out of production and very hard to find USAF 1:48 Scale Douglas SM-75 Thor Prototype Rocket Plastic Model Kit from the Lift-Off Series by MACH. Detailed kit of the prototype of the USAF SM-75 Thor Rocket used to as an ICBM. Comes new in an open manufacturer box. The company does not shrink-wrap their outer boxes, however the content is sealed.

This is the out of production and very hard to find Peanuts Flying Ace Snoopy In His Sopwith Camel Plastic Model Kit by Atlantis. It's the return of the WWII Flying Ace! This is a pre-painted, snap together kit of Snoopy in his WWII Sopwith Camel. The kit features a motor to spin the propeller, peel-and-stick decals, and several "word balloons" to express Snoopy's thoughts. The completed model has an 8-inch (20cm) wingspan. Comes new in a manufacturer shrink-wapped box. The box is in...

This is the out of production and vintage MPC #713 Pilgrim Observer Space Station Plastic Model Kit. This is 2011 limited re-release of the classic kit of a conceptual Nuclear Powered Interplanetary Spacecraft. The kit features a modular design which allows it to be displayed in all modes of the mission . The completed model is 17-inches (43cm) in length in cruising configuration and was last produced in 2011. Comes new in a manufacturer shrink-wrapped box.

This is the out of production and very hard to find Plan 9 From Outer Space 1:48 Scale Flying Saucer Plastic Model Kit made by Polar Lights in 2019. Polar Lights has spared no expense to make this the most accurate studio-scale model created by mortal man. All 61 rivets are accounted for and placed in exactly the same spots, to look exactly like the Lindberg Flying Saucer models Ed Wood used in the production of the movie. Comes new in a manufacturer shrink-wrapped box.

This is the out of production and very hard to find Aurora #6804 Planet of the Apes Dr. Zira plastic model kit. It is approximately 1:8 scale, although the scale is not explicitly stated, is snap-together, and features a base showing the interior of her house . It is the 2000 re-issue of the original Aurora kit and was produced in limited numbers. MINT in a near MINT shrink-wrapped box.

This is the out of production and hard to find #4801 Star Trek Voyager 1:677 scale U.S.S. Voyager plastic model kit by Revell Germany. The completed model is ~20-inches (51cm) in length and features incredible surface detailing and a display stand. These kits were limited in numbers from Revell-Germany in 2009. Skill Level 3. Comes new in a manufacturer sealed box. The box has some minor edge wear, but otherwise is in excellent condition.No time to build and paint this? Let us do it for you!...

This is the vintage and very hard to find Revell #H-1844 Russia's First Spacecraft: VOSTOK 1:24 scale plastic model kot made by Revell in 1998. The completed model includes a detachable crew compartment, an ejecting seat, and a cosmonaut figure. The kit was last produced in 1998 and is skill level 2. Comes new in a manufacturer shrink-wrapped box. The box has some minor indentation creasing on the bottom due to the tight shrink-wrap, but is otherwise in excellent condition. Please see our...

This is the out of production and very hard to find Scooby Doo 1:25 Scale Mystery Machine Van Plastic Model Kit w/ Figures made by Polar Lights in 2015. Jinkies! It's the van used by the Scooby Doo gang during their Scooby-Doo and Shaggy head off for another spooky adventure behind the wheel of their super-sleuthing, customized van - The Mystery Machine. Featuring rolling wheeels and opening rear doors, the kit includes parts molded in color and clear, with Scooby-Doo and Shaggy pre-painted...

This is the out of production and very hard to find AMT #30066 Space 1999 EAGLE 1 TRANSPORTER plastic model kit. It is approximately 1:72 scale and the completed model is 12 inches long and is Skill Level 2. It was last produced in 1998. MINT in an extremely near MINT shrink-wrapped box. This box is pretty close to MINT; no visible dings or creases

This is the out of production and very hard to find Speed Racer 1:25 Scale Mach 5 Snap Plastic Model Kit made by Polar Lights in 2020. Build Speed Racer's amazing racing machine, the Mach 5. The kit features snap-fitting pieces, rotating whells and sticker sheet. The completed model is 8-inches (20cm) in length. Comes new in a manufacturer shrink-wrapped box.

This is the out of production and very hard to find Star Blazers 2199 1:1000 Scale Space Battleship Yamato (Argo) Cosmos Reverse Plastic Model Kit made by Bandai. Includes optional parts for decommissioned Wave Motion Cannon and main wings. Molded in premium quality colored plastic. Comes new in an open box. Note that model kits from Japan are generally not shrink-wrapped, however, the content is new and sealed.

This is the out of production and very hard to find Star Blazers 2199 1:500 scale Space Battleship Yamato Plastic Model Kit made by Bandai. Here is the premier vessel of the Uniited Nations Cosmo Force in large 1:500 scale format. The completed model is a whopping 26-inches (66cm) In length. Comes new in a manufacturer opened box. Note that model kits from Japan are not shrink-wrapped, however, the content is new and sealed.No time to build and paint this? Let us do it for you! See our...

This is the out of production and very hard to find Star Blazers 2202 1:1000 scale U.N.C.F. AAA-1 Andromeda Movie Effect Version Plastic Model Kit made by Bandai. From the series, Space Battleship Yamato 2202 (Star Blazers) comes the 1/1000-scale Andromeda-class ship product which allows you to build 2 versions of the Andromeda. Can choose between the Andromeda and its upgraded parts after being damaged or its sister carrier type ship the Antares. Includes Quadruple-mount Wave Motion Gun...

This is the out of production and very hard to find Star Blazers 2202 1:1000 scale U.N.C.F.D.-1 Dreadnought Plastic Model Kit made by Bandai. In scale with Bandais's Star Blazers 2202 Yunagi Fleet, the Dreadnought is the powerhouse of the fleet. Meticulously detailed and utilizing LED units in the sub engine and wave fire gun create enhanced realism. Set includes display base, 4x Cosmo Tiger IIs, decal sheet, and LED lighting units. Comes new in a manufacturer sealed box.No time to build and...

This is the out of production and very hard to find Star Blazers 2202 1:1000 scale Yunagi Combined Cosmo Fleet Plastic Model Kits made by Bandai. In scale with Bandais's Star Blazers 2202 Andromeda Starship, the Yunagi Fleet is ready to defend in this highly detailed replica model set from the film. The set includes three individually packaged ships, decals and display stands. Comes new in a manufacturer sealed box.No time to build and paint this? Let us do it for you! See our Services Page. ...

This is the out of production and very hard to find Star Blazers 2202 Mecha Collection #12 Type 0 MDL 52 Black Birds Plastic Model Kit made by Bandai. The Mecha Collection features small ships with big detail. This kit includes the parts to make two Black Birds, each completed model is 5-inches (13cm) in length. Comes new in a manufacturer shrink-wrapped box.No time to build and paint this? Let us do it for you! See our Services Page. ...

This is the out of production and very hard to find Star Blazers 2202 Mecha Collection #13 Dreadnaught Plastic Model Kit Plastic Model Kit made by Bandai. The Mecha Collection features small ships with big detail. The completed model is 5-inches (13cm) in length. Comes new in a manufacturer shrink-wrapped box.

This is the out of production and very hard to find Star Blazers 2202 Mecha Collection #7 U.N.C.F. Andromeda AAA-Class Set Plastic Model Kit made by Bandai. This kit contains parts to construct a set of five Andromeda class ships including markings for the AAA-1 Andromeda, AAA-2 Aldebaran, AAA-3 Apollo Norm, AAA-4 Achilles, and AAA-5 Antares. Each completed model is 8-inches (20cm) in length and includes a display stand. Parts are molded in color. Comes new in an open box. Note that model kits...

This is the out of production and very hard to find Star Blazers 3199 1:1000 scale DCV-01 Hyuga Class Battlecarrier Plastic Model Kit made by Bandai. Made of plastic, it includes all the parts you need to assemble a detailed and fully articulated ship. Accessories include a display base, 6x cosmo python, 2x cosmo seagull, 4x cosmo tiger II, waterslide decals and stickers. Comes new in a manufacturer opened box. Note that model kits from Japan are not shrink-wrapped, however, the content is new...

This is the new and very hard to find Space Battleship Yamato 3199 1:1000 Scale Yamato Plastic Model Kit made by Bandai. The third remodeled Yamato with the participation medal award ceremony paint scheme from "Be Forever Yamato: REBEL 3199" is now available as a 1:1000-scale model kit from Bandai! The anchor mark on the bow is reproduced with a convex mold; the precise details and waterslide decals allow you to express the special commemorative paint scheme. The distinctive deck color is...

These are the out of production and very hard to find Polar Lights #4200 and #4202 Star Trek U.S.S. Enterprise and Klingon D7 Battlecruiser plastic model kits. Both kits are snap-together and features parts, decals and instructoins to make one of three Enterprise variations and one of two D7 variations. These kits were produced in 2003 and are Skill Level 1. The come new in manufacturer shrink-wrapped boxes. The boxes are in excellent condition.

This is the out of production and very hard to find Polar Lights #820 Star Trek 1:1000 scale U.S.S. Enterprise Refit Plastic Model Kit. All-new tooling of the finest starship, Star Trek USS Enterprise NCC-1701-A, is finally available in our popular 1:1000 scale. This detailed kit is approximately 12 3/4-inches (32cm) long fully assembled. Features a display stand with ball-and-socket joint for displaying in a variety of angles. Also includes aztec decal set for superior detailing....

This is the out of production and very hard to find Star Trek 1:1400 Scale U.S.S. Enterprise NCC-1701-C Plastic Model Kit made by AMT in 2011. This detailed model kit is molded in light grey and clear plastic, and builds to a full 14.5-inches (37cm) in length. The kit includes new battle damage decals based on the original filming model, optional parts and registry decals for both the Enterprise-C and the U.S.S. Yamaguchi. The kit includes a display stand. Comes new in a manufacturer...

This is the out of production and very hard to find AMT/ETRL #8764 Star Trek 1:2500 scale Deep Space 9 Space Station plastic model kit with fiber optic lighting. The completed model is approximately 16-inches (41cm), contains over 150 pieces and is Skill Level 3. It was last produced in 1995 and includes a limited edition poster. New in a manufacturer shrink-wrapped box. The box has an indentation crease on the front panel due to the tight shrink-wrap, but otherwise is in excellent...

This is the out of production and very hard to find AMT Star Trek 1:2500 Scale U.S.S. Enterprise NCC-1701-C Plastic Model Kit. Kit includes a complete set of decals featuring accurate ship markings and aztec paneling for an extreme level of authenticity. The completed model is 8.25-inches (21cm) long and is Skill Level 2. Comes new in a manufacturer shrink-wrapped box.

This is an out of production AMT/ERTL #8790 Star Trek 1:500 scale Cut-Away U.S.S. Enterprise NCC-1701 plastic model kit. The kit has removable sections which reveal the inner workings of the original Enterprise. The completed model is ~22 inches (57cm) in length and was last produced in 1995. MINT in a near MINT shrink-wrapped box. The box has some indentations and minor creases along the bottom and one side due to the tight shrink-wrap, but otherwise it is in MINT condition.

This is the out of production and very hard to find AMT Star Trek 1:650 scale U.S.S. Enterprise NCC-1701 plastic model kit. This is the 2011 limited edition reissue of the classic kit packaged in a retro style collector's tin. The completed model is 18-inches (46cm) in length and is Skill Level 2. Cones new in a manufacturer shrink-wrapped collector's tin.No time to build and paint this? Let us do it for you! See our Services Page. ...

This is the out of production and very hard to find AMT/ETRL #6676 Star Trek U.S.S. Enterprise plastic model kit. It is approximately 1:650 scale and is Skill Level 2. It was produced in 1983 and is seen in the original Star Trek television series. MINT in a near MINT shrink-wrapped box. The box has a very minor indentation from the tight shrink-wrap, but otherwise is in MINT condition.

This is the out of production and extremely hard to find AMT #853 Star Trek First Contact 1:1400 scale U.S.S. Enterprise NCC-1701-E Plastic Model Kit. The Sovereign-class starship U.S.S. Enterprise NCC-1701-E launched in 2372 from the San Francisco Fleet Yards over Earth. The completed model is approximately 19-inches (48cm) long and is Skill Level 2. It was last produced in 2013. Comes new in a manufacturer shrink-wrapped box.No time to build and paint this? Let us do it for you! See our...

This is the out of production and very hard to find AMT #8766 Star Trek II The Wrath of Khan 1:650 Scale U.S.S. Reliant Plastic Model Kit. It is approximately 1:650 scale and the completed model is 20 inches long and is Skill Level 2. It was last produced in 1995. Comes new in a manufacturer shrink-wrapped box. The box top has some indentation from the tight shrink-wrap, but is otherwise in excellent condition.Please see our Policy on Vintage Products. ...

This is the out of production and very hard to find AMT #38304 Star Wars Imperial SPEEDER BIKE plastic model kit. It is approximately 1:11 scale and is Skill Level 2. It was last produced in 2005. MINT in a near MINT shrink-wrapped box. There is a 1-inch tear in the shrink wrap on the top panel, but otherwise the box is in MINT condition.

This is the out of production and very hard to find Star Wars 1:144 scale Jango Fett's Customized Firespray-class Slave I Plastic Model Kit by Fine Molds. The Slave I, the personal transport of bounty hunter Jango Fett, is a viciously effective, customized starship. This is the smaller scale version with the completed model measuring approximately 6-inches (15cm) long. The kit was last produced in 2011. Comes new in an open manufacturer box. Note that kits form Japan are not generally...

This is the out of production and very hard to find AMT #30123 Star Wars TRADE FEDERATION TANK (AAT) plastic model kit. It is approximately 1:32 scale and is Skill Level 2. It was last produced in 1998. Comes new in a manufacturer shrink-wrapped box. This box has some indentation creasing due to the tight shrink-wrap, but otherwise is in excellent condition. No time to build and paint this? Let us do it for you! See our Services Page. ...

This is an out of production AMT/ERTL #38305 1:58 scale cut-away Star Wars Millennium Falcon plastic model kit. The completed model is ~14 inches (36cm) in diameter and features removable panels that reveal interior compartments and rooms. It was produced in 2005 and is Skill Level 2. Comes new in a manufacturer shrink-wrapped box. The box has a sticker on the front and some minor bowing due to the tight shrink-wrap, but otherwise it is in excellent condition. No time to build and paint this?...

This is the out of production and very hard to find Star Wars 1:72 scale Corellian Engineering Corporation YT-1300 Transport Millennium Falcon plastic model kit by Fine Molds. This is hands-down the best kit of the iconic ship from Star Wars that has ever been released. According to Fine Molds' President Kunihiro Suzuki, he and his staff took over 600 photos (some of which are included on the kit's inner cover) of the 60cm diameter model that was used for principal photography in The Empire...

This is the out of production and very hard to find Star Wars 1:72 scale Incom T-65 X-Wing Starfighter plastic model kit by Fine Molds. Fine Molds' X-Wing kit completely rewrites the standard for science-fiction kits. Yjis is the limited edition version containing a gold C-3PO figure. Besides looking awesome, the kit also has the following features: -Wings open and close after completion-Landing gear can be removed and replaced after completion-Canopy can be completed open or closed-Parts...

This is the out of production and very hard to find Star Wars 1:72 scale Jango Fetts Kuat Systems Engineering Firespray-class Slave I plastic model kit by Fine Molds. The Slave I, the personal transport of bounty hunter Jango Fett, is a viciously effective, customized starship. This is the larger scale version with the completed model measuring approximately 12-inches (20cm) long. The kit was last produced in 2004. Comes new in a manufacturer open box. Note that kits form Japan are not...

This is the out of production and very hard to find Star Wars 1:72 scale Koensayr BTL-A4 Y-Wing Attack Starfighter plastic model kit by Fine Molds. The sturdy fighter-bomber gets its name from its shape; a reinforced central spar connects the cockpit to a cross-spar. At each end of the cross-spar rests a powerful engine nacelle. The kit was last produced in 2007 and includes a display base. MINT in a near MINT open box. Note that kits form Japan are not generally shrink-wrapped, however, the...

This is the out of production and very hard to find Star Wars 1:72 scale Sienar Systems TIE Fighter plastic model kit by Fine Molds. Fine Molds' continues their commitment to quality with this brilliant follow-up to the X-Wing kit from late 2001. Not only is the detail of the kit absolutely brilliant, but they've gone out of their way to make this as easy to build as possible, even if you've never built a plastic model before. Note how the outer panels and the inner spokes are formed from...

This is the out of production and very hard to find Star Wars 1:72 scale Sienar Systems TIE Interceptor plastic model kit by Fine Molds. Fine Molds has answered the cries of thousands of Star Wars fans, and have now produced a TIE Interceptor! Noticeably different from the standard TIE Fighter, the TIE Interceptor features sharp, dagger-like wings, giving it a sleeker, more dangerous appearance; on the tips of the wings are mounted four laser cannons. The kit has been produced with Fine Molds'...

This is the out of production and very hard to find AMT #38273 Star Wars 1:78 scale Millennium Falcon plastic model kit. The completed model is ~10 inches (25cm) in diameter, is Skill Level 2 and was last produced in 2005. A 5x7 inch movie poster is included. MINT in a near MINT shrink-wrapped box. The box has some minor indentations due to the tight shrink-wrap, but otherwise the box is in MINT condition.

This is an out of production and very hard to find MPC #1913 Star Wars 1:8 scale C-3PO (See Threepio) plastic model kit. The completed model is ~10 inches (25cm) tall and features color parts and a display stand This is the original release from 1977.  MINT in a near MINT shrink-wrapped box. The box top has a minor crease and has some indentation due to the tight shrink wrap, but otherwise it is in great condition.

This is an out of production and very hard to find AMT/ETRL #8733 Star Wars Imperial Shuttle Tydirium plastic model kit. The completed model is ~8 inches (20cm) long with a 20-inch (51cm) wingspan and features wings that fold up and down. This is the Commemorative Edition release from 1996. Comes New in a manufacturer shrink-wrapped box. The box has some indentations due to the tight shrink-wrap.Please see our Policy on Vintage Products. ...

This is the out of production and very hard to find Star Wars A New Hope 1:144 Scale Death Star Attack Diorama Plastic Model Kit made by Bandai. This set recreates the assult on the Death Star at the Battle of Yavin. It includes the Death Star Trench Section and an X-Wing Starfighter. The completed trench section is 9-inches (23) long and includes a turbo blaster tower. Comes new in a manufacturer shrink-wrapped box.

This is the new and very hard to find Star Wars A New Hope Star Destroyer Lighted Plastic Model Kit made by Bandai. The long-awaited Star Destroyer from Star Wars is here as a 12 3/5-inch (32cm) long model kit! The Star Wars Star Destroyer 1:5000 Scale Model Kit includes 8 runners, decals, a display stand, an instruction manual and a complete lighing kit. Comes new in a manufacturer sealed box.No time to build and paint this? Let us do it for you! See our Services Page. ...

This is the out of production and very hard to find Star Wars A New Hope 1:72 scale Darth Vader's TIE Advanced X1 Prototype Plastic Model Kit by Fine Molds. Developed to Darth Vaders specifications, Sienar Fleet Systems constructed the TIE Advanced X1 as a predicessor to their later cutting edge fighters, the TIE Avenger and TIE Interceptor. This kit was the last kit produced in very limited numbers just before Fine Molds went out of business. Comes new in a manufacturer open box. Note that...

This is the out of production and very hard to find AMT/ETRL #38303 Star Wars Death Star plastic model kit. The completed model of the Empire's ultimate weapon is 9-inches (23cm) in diameter. The kit is Skill Level 2 and was last produced in 2005. A 5x7-inch collectible movie print is included. Comes new in a manufacturer shrink-wrapped box. The box has some indentation due to the tight shrink-wrap, but otherwise is in excellent condition.No time to build and paint this? Let us do it for...