All Products

This is the new and hard to find Star Wars Millennium Falcon die-cast vehicle from the Hot Wheels Starships line. It is seen in A New Hope, measures ~3-inches (15cm) in length and features a display stand. MINT on a near MINT sealed hanging card. The card has some very minor edge wear, but otherwise is in MINT condition.

This is the new and hard to find Star Wars Red-5 X-Wing Starfighter die-cast vehicle from the Hot Wheels Starships line. It is seen in A New Hope, measures ~3-inches (15cm) in length and features a display stand. MINT on a near MINT sealed hanging card. The card has some very minor edge wear, but otherwise is in MINT condition.

This is the new and hard to find Star Wars TIE Fighter die-cast vehicle from the Hot Wheels Starships line. It is seen in A New Hope, measures ~3-inches (15cm) in length and features a display stand. MINT on a near MINT sealed hanging card. The card has some very minor edge wear, but otherwise is in MINT condition.

This is the new and very hard to find Star Wars Taikoyaku Stormtrooper Statue by Ban Dai. With his Empire-motif banner flying high, Samurai General Darth Vader's (sold separately) band of feudal Stormtroopers strengthens further with the addition of the Taiko Yaku Stormtrooper! As the name suggests, Taiko Yaku comes carrying a Japanese war drum ("taiko"). Fashioned at his waist is a conch shell, ready at any second to signal troops to attack! Traditionally, the Taiko Yaku was a vital member...

This is the new and very hard to find Star Wars Teppo Ashigaru Sandtrooper Statue by Ban Dai. Tamashii Nations has done it again with another addition to the Japanese feudal-style Meisho Movie Realization line! Third to join this unique series is the artillery packed Teppo Ashigaru Sandtrooper! The Sandtrooper version comes with two gun powder type rifles and a Japanese katana sword ready for battle. The special backpack is designed with meticulous detail and finished with a rusty look....

This is the limited edition and very hard to find Star Wars The Book of Boba Fett 1:6 scale Boba Fett Collector's Bust Statue made by Gentle Giant. Boba is Back! This approximately 6-inch (15cm), 1:6-scale bust depicts Boba Fett as he appeared on his new Disney+ series, with new costume details and a high level of sculpting and paint application. Limited to only 3,000 pieces world-wide, it comes packaged in a full-color box with a hand-numbered certificate of authenticity. Designed by Chris...

This is the out of production and very hard to find Star Wars The Empire Strikes Back Dagobah Luke's X-Wing Starfighter w/ R2-D2 made by Hasbro in 2002. Measuring over 19-inches (48cm) long, this replica of the Incom T-65 X-wing Starfighter features landing gear, opening/closing wings, an R2-D2 figure and Luke's Survival Pack Accessories. The ship is weathered/muddied per Dagobah and is set in a Dagobah themed display box. Comes new in a manufacturer sealed display box.

This is the new and very hard to find Star Wars The Empire Strikes Back Super Star Destroyer Plastic Model Kit made by Bandai. The newest vehicle model from Star Wars is the Super Star Destroyer! This model faithfully recreates the massive ship from the original Star Wars trilogy. This highly detailed vehicle from Star Wars is Reproduced in 1/100000-scale, and comes with a stand for display. The ship measure 4.5-inches when assembled. Comes new in a manufacturer sealed box.

This is the new and hard to find Star Wars The Force Awakens Captain Phasma ArtFX Stature made by Kotokubiya in 2016. Captain Phasma is ready for battle in her reflective armor and weapons at the ready. Display Captain Phasma in your choice of two different poses with the included optional arm parts. The vinyl plastic 1:10 scale statue includes magnets in the feet for extra stability on the included display base and stands approximately 7 4/5-inches (20cm) tall. MINT in a near MINT sealed box....

This is the new Star Wars The Force Awakens Duels Card Game made by Hasbro in 2016. Deal out some justice with the Star Wars The Force Awakens Duels Card Game! Perhaps you will be influenced by the Dark Side - or the Light - as your cards duke it out for galactic supremacy. Designed for 2 players, ages 7 and up. MINT in a sealed box.

This is the new and very hard to find Star Wars The Force Awakens First Order TIE Fighter Elite die-cast vehicle from the Mattel Hot Wheels line. This die-cast metal Elite Vehicle is based on Star Wars: The Force Awakens. The replica is expertly crafted with an opening cockpit hatch with a non-removable First Order pilot figure, and it comes with a display stand. It measures 6-inches (15cm) tall x 3 1/2-inches (9cm) wide x 3 1/2-inches (9cm) long. The First Order TIE fighter is reminiscent of...

This is the new and very hard to find Star Wars The Last Jedi First Order Stormtrooper Voice-Changing Helmet Prop Replica made by Hasbro. Where the Empire opted for numbing routine, the First Order’s training simulations and live-fire drills encourage improvisation on the battlefield, making these Stormtroopers more dangerous than their Imperial predecessors. With exquisite features and decoration, this Star Wars Black Series First Order Stormtrooper Helmet Replica embodies the quality and...

This is the new and very hard to find Star Wars The Last Jedi Stormtrooper Force FX Z6 Riot Control Baton made by Hasbro in 2018. Own a full-scale replica modeled after the weapon from Star Wars: The Last Jedi! Imagine wielding the electrifying power of a First Order Riot Control Stormtrooper with the Force FX Z6 Riot Control Baton from Star Wars The Black Series, modeled after the weapon from Star Wars: The Last Jedi. A true-to-story replica of one of the weapons of the First Order...

This is the new and extremely hard to find Star Wars The Mandalorian The Child Animatronic Figure made by Hasbro. Now you can become The Child's protector with this animatronic figure based on the hit Disney+ series, Star Wars: The Mandalorian! Touching the top of The Child's head activates over 25 sound and motion combinations, including happy and excited sounds, giggles, babbles, and more, all while the figure's head moves up and down, ears move back and forth, and eyes open and close. You...

This is the new and very hard to find Star Wars The Mandalorian Razor Crest Die-Cast Vehicle from the Mattel Hot Wheels line. The Hot Wheels Star Wars Starships Select collection features premium designs and packaging. Each ship is 4-1/2 to 6 inches (11-15cm) in size, slightly larger than the traditional Hot Wheels vehicle, and has movable parts to add to their authenticity. The sleek and clean design of the packaging makes it display-ready while still in the box. It also comes with a stand...

This is the out of production and very hard to find Star Wars The Phantom Menace 1:72 scale Naboo N-1 Starfighter Plastic Model Kit by Fine Molds. Protecting the skies and space around Naboo is the N-1 Starfighter. Its sleek design exemplifies the philosophy of art and function. This kit was released in very limited numbers just before Fine Molds went out of business. Comes new in a manufacturer sealed box. The wrap is tight and the bx is in excellent condition.

This is the new and very hard to find Star Wars TIE Fighter Pilot Legends in 3D Bust Statue made by Diamond Select. Watch out, Red Leader! This menacing TIE Fighter pilot is coming up on your six o'clock, and the newest Legend in 3D! Standing approximately 10-inches (25cm) tall atop a mechanical-looking pedestal, this half-scale bust captures the iconic helmet design with detailed sculpting and paint applications. Limited to only 1,000 pieces, it comes packaged in a full-color box with a...

This is the out of production and hard to find Star Wars "Hot Rod" Jedi Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features opening canopy and wings, a racing paint-job, and a display stand. It was produced in 2008. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Anakin's "green" Jedi Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features opening cockpit, folding wingflaps, and a display stand. It was produced in 2006. MINT in a near MINT sealed hanging card. The peg hook has a slight curve and some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Anakin's Modified Jedi Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features an opening cockpit, and a display stand. It was produced in 2006. MINT in a near MINT sealed hanging card. The peg hook has a crease across it and some edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Arc-170 Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in wingspan and features opening cockpit and a display stand. It was produced in 2005. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars AT-AP from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features rotating turrets, and a display stand. It was produced in 2007. MINT in a near MINT sealed hanging card. The peg hook has a slight curve and some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars AT-TE from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features movable legs and a display stand. It was produced in 2006. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Darth Vader's Sith Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features an opening cockpit, folding wingflaps, and a display stand. It was produced in 2006. MINT in a near MINT sealed hanging card. The peg hook has a slight curve and some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Darth Vader's TIE Advanced X1 Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features opening cockpit and a display stand. This is the "chase" version which was painted white. It was produced in 2007. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars General Grievous Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features fold-down landing gear and a display stand. It was produced in 2006. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Jabba's Desert Skiff from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features an extending plank and a display stand. It was produced in 2007. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Jabba's Sail Barge from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features a display stand. It was produced in 2006. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Kashyyyk themed AT-RT from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features rolling wheels, opening turret hatch, and a display stand. It was produced in 2007. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Kit Fisto's Jedi Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and diameter and features a opening cockpit, removable hyperdrive ring and a display stand. It was produced in 2007. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Mace Windu's Purple Jedi Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features opening cockpit, folding wings, and a display stand. It was produced in 2008. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Obi-Wan's blue Jedi Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features opening cockpit, folding wingflaps, and a display stand. It was produced in 2006. MINT in a near MINT sealed hanging card. The peg hook has a minor curve and some minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Obi-wan's Jedi Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and diameter and features an opening cockpit, removable hyperdrive ring and a display stand. It was produced in 2006. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has a minor ding on the top panel and some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Obi-Wan's red Jedi Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features opening cockpit, folding wingflaps, and a display stand. It was produced in 2007. MINT in a near MINT sealed hanging card. The peg hook has a slight curve and some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars orange squadron B-Wing Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features folding wingflaps, and a display stand. It was produced in 2007. MINT in a near MINT sealed hanging card. The peg hook has a slight curve and some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Plo Koon's Jedi Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and diameter and features opening cockpit, removable hyperdrive ring, and a display stand. It was produced in 2007. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Swamp Speeder from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in diameter and features rotating turrets, and a display stand. It was produced in 2006. MINT in a near MINT sealed hanging card. The peg hook has a slight curve and some minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars T-16 Skyhopper from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in height and features a rotating laser cannon and a display stand. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Trade Federation AAT from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features rolling wheels, opening turret hatch, and a display stand. It was produced in 2006. MINT in a near MINT sealed hanging card. The peg hook has a minor crease and some edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars ARC-170 STARFIGHTER from the Titanium Ultra line by Hasbro. The pre-painted die-cast model has a ~7 wing-span and features an opening cockpit and a display case. MINT in a near MINT sealed box. The box has extremely minor edge wear and there is a very minor scuff on the display dome, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Boba Fett's version of the SLAVE I from the Titanium Ultra line by Hasbro. The pre-painted die-cast model is ~7 inches in length and features pivoting wings, rotating guns and a display case. MINT in a near MINT sealed box. The box has extremely minor edge wear, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Darth Vader's TIE Advanced X1 Starfighter from the Titanium Ultra line by Hasbro. The pre-painted die-cast model is ~6 inches (15cm) in length and features opening cockpit and a display case. It was produced in limited numbers in 2006 and was the near the end of the Titanium Ultra vehicles. MINT in a near MINT sealed box. The box has extremely minor edge wear, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Federation TRI-DROID FIGHTER from the Titanium Ultra line by Hasbro. The pre-painted die-cast model is ~7 inches in length and features rotating wings and a display case. MINT in a near MINT sealed box. The box has extremely minor edge wear, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Revenge of the Sith Republic Gunship from the Titanium Ultra line by Hasbro. The pre-painted die-cast model is ~6 inches (15cm) in length and features opening cockpit, rotating gun pods and a display case. It was produced in extremely limited numbers in 2006 and was the last of the Titanium Ultra vehicles. MINT in a near MINT sealed box. The box has extremely minor edge wear and the bubble has some minor scuffing, but otherwise is in...

This is the out of production and hard to find Star Wars SNOWSPEEDER from the Titanium Ultra line by Hasbro. The pre-painted die-cast model is ~7 inches in diagonal length and features opening cockpit and a display case. MINT in a near MINT sealed box. The box has a small crease on the left-front panel and a small dent on the back-left-top corner, but otherwise is in Excellent condition.

This is the out of production and hard to find Star Wars V-Wing Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features fold-out wings and a display stand. It was produced in 2007. MINT in a near MINT sealed hanging card. The peg hook has a minor curve and some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Vulture Droid from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features a display stand. It was produced in 2005. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and very hard to find Star Wars Unleashed Aayla Secura Battle at Geonosis Statue made by Hasbro in 2004. Beautiful, graceful, powerful. Aayla Secura displays the innate elegance and charm of the Twi'lek species even as she wields her lightsaber in battle. This highly detailed vinyl statue from the past stands ~8-inches (20cm) tall and includes lightsaber and a Geonosis themed base. Comes new in a manufacturer sealed hanging card. The card has some very minor...