Hasbro

This is the out of production and hard to find Star Wars ARC-170 STARFIGHTER from the Titanium Ultra line by Hasbro. The pre-painted die-cast model has a ~7 wing-span and features an opening cockpit and a display case. MINT in a near MINT sealed box. The box has extremely minor edge wear and there is a very minor scuff on the display dome, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Federation TRI-DROID FIGHTER from the Titanium Ultra line by Hasbro. The pre-painted die-cast model is ~7 inches in length and features rotating wings and a display case. MINT in a near MINT sealed box. The box has extremely minor edge wear, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars SNOWSPEEDER from the Titanium Ultra line by Hasbro. The pre-painted die-cast model is ~7 inches in diagonal length and features opening cockpit and a display case. MINT in a near MINT sealed box. The box has a small crease on the left-front panel and a small dent on the back-left-top corner, but otherwise is in Excellent condition.

This is the out of production and hard to find Star Wars Boba Fett's version of the SLAVE I from the Titanium Ultra line by Hasbro. The pre-painted die-cast model is ~7 inches in length and features pivoting wings, rotating guns and a display case. MINT in a near MINT sealed box. The box has extremely minor edge wear, but otherwise is in MINT condition.

This is the out of production and hard to find Battlestar Galactica GALACTICA from the Titanium Ultra line by Hasbro. The pre-painted die-cast model is ~7 inches in length and features slide out launch bay arms and a display case. MINT in a near MINT sealed box. The box has a small crease on the left-front panel and some minor edge wear, but otherwise it is in Excellent condition.

This is the out of production and hard to find Star Wars Revenge of the Sith Republic Gunship from the Titanium Ultra line by Hasbro. The pre-painted die-cast model is ~6 inches (15cm) in length and features opening cockpit, rotating gun pods and a display case. It was produced in extremely limited numbers in 2006 and was the last of the Titanium Ultra vehicles. MINT in a near MINT sealed box. The box has extremely minor edge wear and the bubble has some minor scuffing, but otherwise is in...

This is the out of production and hard to find Star Wars Darth Vader's TIE Advanced X1 Starfighter from the Titanium Ultra line by Hasbro. The pre-painted die-cast model is ~6 inches (15cm) in length and features opening cockpit and a display case. It was produced in limited numbers in 2006 and was the near the end of the Titanium Ultra vehicles. MINT in a near MINT sealed box. The box has extremely minor edge wear, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Kit Fisto's Jedi Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and diameter and features a opening cockpit, removable hyperdrive ring and a display stand. It was produced in 2007. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Jabba's Desert Skiff from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features an extending plank and a display stand. It was produced in 2007. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Jabba's Sail Barge from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features a display stand. It was produced in 2006. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Vulture Droid from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features a display stand. It was produced in 2005. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars "Hot Rod" Jedi Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features opening canopy and wings, a racing paint-job, and a display stand. It was produced in 2008. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars AT-TE from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features movable legs and a display stand. It was produced in 2006. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Obi-wan's Jedi Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and diameter and features an opening cockpit, removable hyperdrive ring and a display stand. It was produced in 2006. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has a minor ding on the top panel and some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Darth Vader's TIE Advanced X1 Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features opening cockpit and a display stand. This is the "chase" version which was painted white. It was produced in 2007. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars V-Wing Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features fold-out wings and a display stand. It was produced in 2007. MINT in a near MINT sealed hanging card. The peg hook has a minor curve and some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Mace Windu's Purple Jedi Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features opening cockpit, folding wings, and a display stand. It was produced in 2008. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars General Grievous Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features fold-down landing gear and a display stand. It was produced in 2006. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Arc-170 Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in wingspan and features opening cockpit and a display stand. It was produced in 2005. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars T-16 Skyhopper from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in height and features a rotating laser cannon and a display stand. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Trade Federation AAT from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features rolling wheels, opening turret hatch, and a display stand. It was produced in 2006. MINT in a near MINT sealed hanging card. The peg hook has a minor crease and some edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Kashyyyk themed AT-RT from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features rolling wheels, opening turret hatch, and a display stand. It was produced in 2007. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Anakin's "green" Jedi Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features opening cockpit, folding wingflaps, and a display stand. It was produced in 2006. MINT in a near MINT sealed hanging card. The peg hook has a slight curve and some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars AT-AP from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features rotating turrets, and a display stand. It was produced in 2007. MINT in a near MINT sealed hanging card. The peg hook has a slight curve and some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.