Products 97-144 of 154
Show
Availability: In Stock
Fine Molds
Item #: FMD-SW10 -
This is the out of production and very hard to find Star Wars 1:48 scale Incom T-47 Snowspeeder Plastic Model Kit by Fine Molds. Fine Molds' Snowspeeder kit completely rewrites the standard for science-fiction kits. Besides looking awesome, the completed model is approximately 5-inches (12cm( in length and features2x Pilot Figures. The kit was last produced in 2009 and contains over 74 parts and a decal sheet. Comes new in an open box. Note that boxes form Japan are not shrink-wrapped,...
Availability: In Stock
AMT/ETRL
Item #: AMT-30130 -
This is the out of production and very hard to find AMT/ETRL #30130 Star Wars Episode I Naboo Starfighter Die-Cast model kit. It is approximately 1:48 scale, is Skill Level 1, and consists of pre-painted die-cast parts that are assembled with a small philips head screwdriver (not included). It was produced in 1999 and is seen in The Phantom Menace. Comes new in a manufacturer shrink-wrapped box. The box has a crease on the back panel, but otherwise the box is in excellent condition and...
Availability: In Stock
AMT/ETRL
Item #: AMT-38305 -
This is an out of production AMT/ERTL #38305 1:58 scale cut-away Star Wars Millennium Falcon plastic model kit. The completed model is ~14 inches (36cm) in diameter and features removable panels that reveal interior compartments and rooms. It was produced in 2005 and is Skill Level 2. Comes new in a manufacturer shrink-wrapped box. The box has a sticker on the front and some minor bowing due to the tight shrink-wrap, but otherwise it is in excellent condition. No time to build and paint this?...
Availability: In Stock
Fine Molds
Item #: FMD-SW6 -
This is the out of production and very hard to find Star Wars 1:72 scale Corellian Engineering Corporation YT-1300 Transport Millennium Falcon plastic model kit by Fine Molds. This is hands-down the best kit of the iconic ship from Star Wars that has ever been released. According to Fine Molds' President Kunihiro Suzuki, he and his staff took over 600 photos (some of which are included on the kit's inner cover) of the 60cm diameter model that was used for principal photography in The Empire...
Availability: In Stock
Fine Molds
Item #: FMD-SW1 -
This is the out of production and very hard to find Star Wars 1:72 scale Incom T-65 X-Wing Starfighter plastic model kit by Fine Molds. Fine Molds' X-Wing kit completely rewrites the standard for science-fiction kits. Besides looking awesome, the kit has the following features:-Wings open and close after completion-Landing gear can be removed and replaced after completion-Canopy can be completed open or closed-Parts included for Red 1, Red 2, Red 3, or Red 5 (Red leader, Wedge, Biggs and Luke,...
Availability: In Stock
Fine Molds
Item #: FMD-SW4 -
This is the out of production and very hard to find Star Wars 1:72 scale Jango Fetts Kuat Systems Engineering Firespray-class Slave I plastic model kit by Fine Molds. The Slave I, the personal transport of bounty hunter Jango Fett, is a viciously effective, customized starship. This is the larger scale version with the completed model measuring approximately 12-inches (20cm) long. The kit was last produced in 2004. Comes new in a manufacturer open box. Note that kits form Japan are not...
Availability: In Stock
Fine Molds
Item #: FMD-SW8 -
This is the out of production and very hard to find Star Wars 1:72 scale Koensayr BTL-A4 Y-Wing Attack Starfighter plastic model kit by Fine Molds. The sturdy fighter-bomber gets its name from its shape; a reinforced central spar connects the cockpit to a cross-spar. At each end of the cross-spar rests a powerful engine nacelle. The kit was last produced in 2007 and includes a display base. MINT in a near MINT open box. Note that kits form Japan are not generally shrink-wrapped, however, the...
Availability: In Stock
Fine Molds
Item #: FMD-SW3 -
This is the out of production and very hard to find Star Wars 1:72 scale Kuat Systems Engineering Jedi Starfighter w/ Hyperdrive Ring plastic model kit by Fine Molds. The Fine Molds Jedi Starfighter kit is the only model of this unique ship from Episode II! The word is that Lucas & Co. were so impressed with Fine Molds' work on their X-Wing and TIE Fighter that they basically insisted that the company release this ship as well! This beauty features the same sort of crisp detail that they gave...
Availability: In Stock
Fine Molds
Item #: FMD-SW2 -
This is the out of production and very hard to find Star Wars 1:72 scale Sienar Systems TIE Fighter plastic model kit by Fine Molds. Fine Molds' continues their commitment to quality with this brilliant follow-up to the X-Wing kit from late 2001. Not only is the detail of the kit absolutely brilliant, but they've gone out of their way to make this as easy to build as possible, even if you've never built a plastic model before. Note how the outer panels and the inner spokes are formed from...
Availability: In Stock
Fine Molds
Item #: FMD-SW5 -
This is the out of production and very hard to find Star Wars 1:72 scale Sienar Systems TIE Interceptor plastic model kit by Fine Molds. Fine Molds has answered the cries of thousands of Star Wars fans, and have now produced a TIE Interceptor! Noticeably different from the standard TIE Fighter, the TIE Interceptor features sharp, dagger-like wings, giving it a sleeker, more dangerous appearance; on the tips of the wings are mounted four laser cannons. The kit has been produced with Fine Molds'...
Availability: In Stock
AMT/ETRL
Item #: AMT-38273 -
This is the out of production and very hard to find AMT #38273 Star Wars 1:78 scale Millennium Falcon plastic model kit. The completed model is ~10 inches (25cm) in diameter, is Skill Level 2 and was last produced in 2005. A 5x7 inch movie poster is included. MINT in a near MINT shrink-wrapped box. The box has some minor indentations due to the tight shrink-wrap, but otherwise the box is in MINT condition.
Availability: Out of Stock
MPC
Item #: MPC-1913 -
This is an out of production and very hard to find MPC #1913 Star Wars 1:8 scale C-3PO (See Threepio) plastic model kit. The completed model is ~10 inches (25cm) tall and features color parts and a display stand This is the original release from 1977. MINT in a near MINT shrink-wrapped box. The box top has a minor crease and has some indentation due to the tight shrink wrap, but otherwise it is in great condition.
Availability: In Stock
AMT
Item #: AMT-8733 -
This is an out of production and very hard to find AMT/ETRL #8733 Star Wars Imperial Shuttle Tydirium plastic model kit. The completed model is ~8 inches (20cm) long with a 20-inch (51cm) wingspan and features wings that fold up and down. This is the Commemorative Edition release from 1996. Comes New in a manufacturer shrink-wrapped box. The box has some indentations due to the tight shrink-wrap.
Availability: In Stock
Bandai
Item #: BAN-122585 -
This is the new and very hard to find Star Wars A New Hope Star Destroyer Lighted Plastic Model Kit made by Bandai. The long-awaited Star Destroyer from Star Wars is here as a 12 3/5-inch (32cm) long model kit! The Star Wars Star Destroyer 1:5000 Scale Model Kit includes 8 runners, decals, a display stand, an instruction manual and a complete lighing kit. Comes new in a manufacturer sealed box.No time to build and paint this? Let us do it for you! See our Services Page. ...
Availability: In Stock
Fine Molds
Item #: FMD-SW16 -
This is the out of production and very hard to find Star Wars A New Hope 1:72 scale Darth Vader's TIE Advanced X1 Prototype Plastic Model Kit by Fine Molds. Developed to Darth Vaders specifications, Sienar Fleet Systems constructed the TIE Advanced X1 as a predicessor to their later cutting edge fighters, the TIE Avenger and TIE Interceptor. This kit was the last kit produced in very limited numbers just before Fine Molds went out of business. Comes new in a manufacturer open box. Note that...
Availability: In Stock
AMT/ETRL
Item #: AMT-38303 -
This is the out of production and very hard to find AMT/ETRL #38303 Star Wars Death Star plastic model kit. The completed model of the Empire's ultimate weapon is 9-inches (23cm) in diameter. The kit is Skill Level 2 and was last produced in 2005. A 5x7-inch collectible movie print is included. Comes new in a manufacturer shrink-wrapped box. The box has some indentation due to the tight shrink-wrap, but otherwise is in excellent condition.No time to build and paint this? Let us do it for...
Availability: In Stock
AMT/ETRL
Item #: AMT-38271 -
This is the out of production and very hard to find AMT #38371 Star Wars Imperial AT-AT Walker plastic model kit. The completed model is ~9 inches (22cm) long, is Skill Level 2 and was last produced in 2005. A 5x7 inch movie poster is included. MINT in a near MINT shrink-wrapped box. The box has some minor indentations due to the tight shrink-wrap, but otherwise the box is in MINT condition.
Availability: In Stock
AMT/ETRL
Item #: AMT-38302 -
This is the out of production and very hard to find AMT #38302 Star Wars Imperial AT-ST Walker plastic model kit. The completed model is ~7 inches (18cm) tall, is Skill Level 2 and was last produced in 2005. A 5x7 inch movie poster is included. MINT in a near MINT shrink-wrapped box. The box has some minor indentations due to the tight shrink-wrap, but otherwise the box is in MINT condition.
Availability: In Stock
Fascinations
Item #: FAS-259 -
This is the new and very hard to find Fascinations #259 Star Wars Imperial Shuttle metal earth model kit. The unique kit is made of photo-etched sheets containing parts that you cut-out, bend and snap into place. The result is a highly detailed miniature of your favorite Start Wars vehicles. The completed model has a ~4" (10cm) wingspan and is lite enough to use as a Christmas tree ornament. MINT in a near MINT sealed hanging card. The card has some very minor edge wear, but is otherwise in...
Availability: In Stock
Fascinations
Item #: FAS-256 -
This is the new and very hard to find Fascinations #256 Star Wars Imperial TIE Fighter metal earth model kit. The unique kit is made of photo-etched sheets containing parts that you cut-out, bend and glue into place. The result is a highly detailed miniature of your favorite Start Wars vehicles. The completed model has a ~4" (10cm) wingspan and is lite enough to use as a Christmas tree ornament. MINT in a near MINT sealed hanging card. The card has some very minor edge wear, but is otherwise...
Availability: Out of Stock
Fascinations
Item #: FAS-250 -
This is the new and very hard to find Fascinations #250 Star Wars R2-D2 metal earth model kit. The unique kit is made of photo-etched sheets containing parts that you cut-out, bend and glue into place. The result is a highly detailed miniature of your favorite Start Wars vehicles. The completed model is ~4" (10cm) in height and is light enough to use as a Christmas tree ornament. MINT in a near MINT sealed hanging card. The card has some very minor edge wear, but is otherwise in MINT...
Availability: In Stock
AMT/ETRL
Item #: AMT-8377 -
This is the out of production and very hard to find AMT/ETRL #8377 Star Wars Shadows of the Empire Virago plastic model kit. The completed model can be posed with the wings in the open or closed position and includes a display stand. The kit is Skill Level 2 and was produced in 1997. MINT in a near MINT shrink-wrapped box. The box has some minor indentation due to the tight shrink-wrap, but otherwise is in MINT condition.
Availability: In Stock
AMT/ETRL
Item #: AMT-38272 -
This is the out of production and very hard to find AMT #38372 Star Wars Snowspeeder plastic model kit. The completed model is ~6 inches (15cm) long, is Skill Level 2 and was last produced in 2005. A 5x7 inch movie poster is included. MINT in a near MINT shrink-wrapped box. The box has some minor indentations due to the tight shrink-wrap, but otherwise the box is in MINT condition.
Availability: In Stock
Bandai
Item #: BAN-225754 -
This is the out of production and very hard to find Star Wars Solo 1:144 Scale Lando Calrissian Millennium Falcon Plastic Model Kit made by Bandai. Utilizing new molding, this version of the Falcon includes removable sections of the fuselage to display the highly detailed interiors of the cabin along with a special gimmick that allows the front shuttle portion to be shown separated from the main body. Two stands for the shuttle and Falcon are included along with 2 laser effect parts for the...
Availability: In Stock
Bandai
Item #: BAN-26410 -
This is the new and very hard to find Star Wars The Empire Strikes Back Super Star Destroyer Plastic Model Kit made by Bandai. The newest vehicle model from Star Wars is the Super Star Destroyer! This model faithfully recreates the massive ship from the original Star Wars trilogy. This highly detailed vehicle from Star Wars is Reproduced in 1/100000-scale, and comes with a stand for display. The ship measure 4.5-inches when assembled. Comes new in a manufacturer sealed box.
Availability: In Stock
Fine Molds
Item #: FMD-SW15 -
This is the out of production and very hard to find Star Wars The Phantom Menace 1:72 scale Naboo N-1 Starfighter Plastic Model Kit by Fine Molds. Protecting the skies and space around Naboo is the N-1 Starfighter. Its sleek design exemplifies the philosophy of art and function. This kit was released in very limited numbers just before Fine Molds went out of business. Comes new in a manufacturer sealed box. The wrap is tight and the bx is in excellent condition.
Availability: In Stock
Fascinations
Item #: FAS-266 -
This is the new and very hard to find Fascinations #266 Star Wars VII Kylo Ren's Command Shuttle metal earth model kit. The unique kit is made of photo-etched sheets containing parts that you cut-out, bend and snap into place. The result is a highly detailed miniature of your favorite Start Wars vehicles. The completed model has a ~4" (10cm) wingspan and is lite enough to use as a Christmas tree ornament. MINT in a near MINT sealed hanging card. The card has some very minor edge wear, but is...
Availability: In Stock
Fascinations
Item #: FAS-267 -
This is the new and very hard to find Fascinations #267 Star Wars VII First Order Special Forces TIE Fighter vehicle metal earth model kit. The unique kit is made of photo-etched sheets containing parts that you cut-out, bend and snap into place. The result is a highly detailed miniature of your favorite Star Trek vehicles. The completed model has a ~4" (10cm) length and is lite enough to use as a Christmas tree ornament. MINT in a near MINT sealed hanging card. The card has some very minor...
Availability: In Stock
Pegasus
Item #: PGS-9016 -
This is an out of production and very hard to find Pegasus #9016 Terminator 2 1:32 scale Aerial Hunter Machine Plastic Model Kit. The completed model is ~9 inches (23cm) long and comes with a logo display base. It was last produced in 2013. Comes new in a manufacturer shrink-wrapped box.
Availability: In Stock
Pegasus
Item #: PGS-9217 -
This is an out of production and very hard to find Pegasus #9017 Terminator 2 Limited Edition 1:32 scale T-800 Endoskeletons Plastic Model Kit. It features five endoskeleton figures and a detailed war zone display base. This is the limited edition chrome plated version of the kit and was produced in 2014. Comes new in a manufacturer shrink-wrapped box.
Availability: In Stock
MPC
Item #: MPC-779/12 -
This is the out of production and limited edition MPC #779/12 The Beatles Yellow Submarine Plastic Model Kit. Available for a limited re-release from MPC is the classic Yellow Submarine model kit inspired by the Beatles song and cartoon movie. The kit builds easily and features opening doors and wind-up propeller action. It comes injected in yellow plastic and includes chrome parts, an expanded decals sheet, pictorial instructions. The kit is 1:25 scale and is Skill Level 2. The completed...
Availability: In Stock
Moebius
Item #: MOB-919 -
This is the out of production and extremely hard to find Batman The Dark Knight 1:25 scale Batmobile (a.k.a. Bat-Tumbler) plastic model kit released by Moebius in 2013. This completed model is ~7-inches (18cm) in length and features realistic soft PVC tires, a super detailed precision tooled body, and detailed interiors. The model is skill level 3. New in a manufacturer shrink-wrapped box. The wrap is tight and the box is in excellent condition.No time to build and paint this? Let us do...
Availability: In Stock
Atlantis
Item #: ATL-1006 -
This is the out of production and limited edition Atlantis The Invaders 1:72 scale UFO plastic model kit. This is the 2015 limited edition reissue of the classic Aurora kit depicting the UFO seen in the Invaders Television show. The completed model is kit is 7-inches (18cm) in diameter and is Skill Level 2. The reissue was limited to just 1500 pieces worldwide. Comes new in a manufacturer shrink-wrapped box.No time to build and paint this? Let us do it for you! See our Services Page. ...
Availability: In Stock
Polar Lights
Item #: PLS-913 -
This is the out of production and very hard to find The Jetsons 1:25 Scale Jetson Family Flying Capsule Car Plastic Model Kit w/ Figures made by Polar Lights in 2013. This model kit of George Jetson's flying Capsule Car features simple snap assembly. It comes molded in green and clear plastic. A sturdy arm supports the model above the base. It includes pre-painted figures of George and his faithful dog Astro. Comes new in a manufacturer shrink-wrapped box. The wrap is tight and the box is in...
Availability: In Stock
Polar Lights
Item #: PLS-5020 -
This is an out of production and very hard to find Polar Lights #5020 Skull, Lizard and Rat Customizing Monster model kit. The kit contains parts to accessorize your monster dioramas. This kit was produced in 1998. MINT in a near MINT shrink-wrapped box.
Availability: In Stock
Polar Lights
Item #: PLS-5021 -
This is an out of production and very hard to find Polar Lights #5021 Vulture and Mad Dog Customizing Monster model kit. The kit contains parts to accessorize your monster dioramas. This kit was produced in 1998. MINT in a near MINT shrink-wrapped box.
Availability: In Stock
Aoshima
Item #: AOS-3558 -
This is the out of production and extremely hard to find Thunderbirds 1:144 scale Thunderbird 1 Plastic Model Kit by Aoshima in 2013. Highly detailed kit is molded in color and features retractable wings and landing gear. New a manufacturer shrink-wrapped box. The wrap is tight and the box is in excellent condition. Thunderbirds are go!No time to build and paint this? Let us do it for you! See our Services Page. ...
Availability: In Stock
Aoshima
Item #: AOS-5224 -
This is the out of production and extremely hard to find Thunderbirds Thunderbird 1 and Launch Bay plastic model kit by Aoshima. Highly detailed kit is molded in color and includes both the Thunderbird 1 and Launch Bay scene. New a manufacturer shrink-wrapped box. The wrap is tight and the box is in excellent condition.No time to build and paint this? Let us do it for you! See our Services Page. ...
Availability: In Stock
Aoshima
Item #: AOS-5262 -
This is the out of production and extremely hard to find Thunderbirds Thunderbird 5 and 3 Twin-Pack plastic model kit by Aoshima. Highly detailed kit is molded in color and includes both the Thunderbird 3 and Thunderbird 5 Space Station. New a manufacturer shrink-wrapped box. The wrap is tight and the box is in excellent condition. Thunderbirds are go!No time to build and paint this? Let us do it for you! See our Services Page. ...
Availability: In Stock
Aoshima
Item #: AOS-3527 -
This is the out of production and extremely hard to find Thunderbirds Tracy Island Diorama Plastic Model Kit by Aoshima in 2013. Highly detailed kit is molded in color and includes the Tracy Island complex plus scale versions of Thunderbirds 1, 2 and 3. New a manufacturer shrink-wrapped box. The wrap is tight and the box is in excellent condition. Thunderbirds are go!
Availability: Out of Stock
MPC
Item #: MPC-790 -
This is the out of production and limited edition MPC #790 U.S. Airforce 1:100 scale Titan IIIc Limited Edition Plastic Model Kit. The completed model is ~12 inches (31cm) in length and features expanded decals with detailed markings and an educational booklet about the development of this heavy lift vehicle. Comes new in a manufacturer shrink-wrapped box.
Availability: In Stock
Fascinations
Item #: FAS-062 -
This is the new and very hard to find Fascinations #062 U.S. Air Force SR-71 Blackbird Jet metal earth model kit. The unique kit is made of photo-etched sheets containing parts that you cut-out, bend and glue into place. The result is a highly detailed miniature of your favorite Start Wars vehicles. The completed model is ~4" (10cm) in height and is light enough to use as a Christmas tree ornament. MINT in a near MINT sealed hanging card. The card has some very minor edge wear, but is...
Availability: In Stock
Aoshima
Item #: AOS-2000 -
This is the out of production and extremely hard to find UFO 1:72 scale S.H.A.D.O. Mobile motorized plastic model kit by Aoshima. Highly detailed kit building up to a 6-inch (15cm) completed model. Incudes electonics necessary to motorize the vehicle. Last produced in 2004. New in an open box. Most kits from Japan do not come with outer shrink-wrap. The content is manufactuer sealed.
Availability: In Stock
Bandai
Item #: BAN-49798 -
This is a new and very hard to find Bandai Ultraman Magma Riser plastic model kit from the Mecha Collection by Bandai America. Making its debut in episode 17 Underground GO! GO! GO!, the 3 3/4-inch (9cm) tall Magma Riser looks dynamic despite being small enough to fit in the palm of your hand! Every detail in the missile launcher and jet drill has been faithfully recreated. Water slide decals and instruction manual (Printed on back of box) are included. New in an excellent condition opened box...
Availability: In Stock
Bandai
Item #: BAN-208103 -
This is a new and very hard to find Bandai Ultraman Space VTOL plastic model kit from the Mecha Collection by Bandai America. In celebration of the 50th-anniversary of the Ultraman series, the Space VTOL is now available! Fitting in the palm of your hand, the model is highly realistic. The distinctive shape of the Space VTOL is recreated using colored plastic and water-transfer stickers for the markings. The completed model is 3.5-Inches (9cm) in length and includes a display stand. Mint in a...
Availability: In Stock
Bandai
Item #: BAN-58465 -
This is a new and very hard to find Bandai Ultraman Ultrahawk 001 Alpha plastic model kit from the Mecha Collection by Bandai America. In celebration of the 50th-anniversary of the Ultraman series, the Ultrahawk 001 Alpha is now available! The Ultra Hawk 001 Alpha joins Bandai's Mecha Collection model kit lineup! It comes with stickers for the markings and a base for display; combine it with the Ultra Hawk 001 Gamma and Ultra Hawk 001 Beta to form the complete Ultra Hawk 001! The completed...
Availability: In Stock
Bandai
Item #: BAN-58466 -
This is a new and very hard to find Bandai Ultraman Ultrahawk 001 Beta plastic model kit from the Mecha Collection by Bandai America. In celebration of the 50th-anniversary of the Ultraman series, the Ultrahawk 001 Beta is now available! The Ultra Hawk 001 Beta joins Bandai's Mecha Collection model kit lineup! It comes with stickers for the markings and a base for display; combine it with the Ultra Hawk 001 Gamma and Ultra Hawk 001 Alpha to form the complete Ultra Hawk 001! The completed model...
Availability: In Stock
Bandai
Item #: BAN-58468 -
This is a new and very hard to find Bandai Ultraman Ultrahawk 001 plastic model kit from the Mecha Collection by Bandai America. In celebration of the 50th-anniversary of the Ultraman series, the Ultrahawk 001 Gamma is now available! The Ultra Hawk 001 Gamma joins Bandai's Mecha Collection model kit lineup! It comes with stickers for the markings and a base for display; combine it with the Ultra Hawk 001 Alpha and Ultra Hawk 001 Beta to form the complete Ultra Hawk 001! The completed model is...